Electromagnetic Chucks

transverse pole chuck

Transverse Pole Chuck

The poles of this chuck run across the chuck from side to side. Pole spacing in the smaller chucks, up to 10" x 24", is generally 1/4" magnetic steel and 1/16" nonmagnetic stainless steel. Pole spacing of 1/4" magnetic and 1/8" nonmagnetic steel is used in the larger chucks.

longitudinal pole chuck

Longitudinal Pole Chuck

The poles of this chuck run the length of the chuck from end to end. Pole spacing up to 24" long is generally 1/4" magnetic steel and 1/16" nonmagnetic stainless steel. Pole spacing of 1/4" magnetic steel and 1/8" nonmagnetic stainless steel is used for larger chucks. Top plates on both chucks are furnace brazed, making the magnetic and nonmagnetic steel into one solid, water tight unit.

machining chuck

Machining Chuck

The Magnetool Extra Power electromagnetic machine chuck has a coil for each pole. The extra power makes this a good chuck for milling, shaping and heavy stock removal. It is made to order in practically any size required.

Ordering Information

Request a Quote

To order Longitudinal and Transverse Chucks Place an "L" in front of the model number for a longitudinal or long-bar chuck and a "T" for transverse or short-bar chuck. The A.C. input voltage and D.C. output voltage should be stated. The Model No. is also the size of the chuck.

Electromagnetic Chucks with Rectifier Controllers
Model & Size Height Longitudinal Chucks Transverse Chucks
Inches Watts Recommended Control Watts Recommended Control
510 3-3/4 45 MR-110-150VP 55 MR-110-150VP
612 3-3/4 65 MR-110-150VP 75 MR-110-150VP
618 3-3/4 115 MR-110-150VP 110 MR-110-150VP
624 3-3/4 160 MR-110-300VP 145 MR-110-150VP
818 3-3/4 120 MR-110-150VP 145 MR-110-150VP
824 4-1/4 200 CC-110-300VP 195 CC-110-300VP
836 4-1/4 300 CC-110-300VP 250 CC-110-300VP
848 4-1/4 350 CC-110-500VP 380 CC-110-500VP
1015 3-3/4 180 CC-110-300VP 160 CC-110-300VP
1024 4-1/4 255 CC-110-300VP 240 CC-110-300VP
1030 4-1/4 275 CC-110-300VP 305 CC-110-500VP
1036 4-3/4 325 CC-110-300VP 350 CC-110-500VP
1048 4-3/4 380 SD-110-500VP 500 SD-110-500VP
1060 4-3/4 480 SD-110-500VP 600 SD-110-750VP
1224 4-1/4 300 SD-110-300VP 290 SD-110-300VP
1230 4-3/4 320 SD-110-500VP 360 SD-110-500VP
1236 4-3/4 435 SD-110-500VP 445 SD-110-500VP
1248 5-1/4 400 SD-110-500VP 565 SD-110-750VP
1260 5-1/4 430 SD-110-500VP 745 SD-110-750VP
1424 4-3/4 300 SD-110-300VP 400 SD-110-500VP
1436 4-3/4 400 SD-110-500VP 500 SD-110-500VP
1448 5-1/4 470 SD-110-500VP 670 SD-110-750VP
1460 5-1/4 685 SD-110-750VP 840 SD-110-1000VP
1624 5-1/4 340 SD-110-500VP 380 SD-110-500VP
1636 5-1/4 460 SD-110-500VP 570 SD-110-750VP
1648 5-1/4 600 SD-110-750VP 835 SD-110-1000VP
1660 5-1/4 680 SD-110-750VP 1100 SD-110-1500VP
1824 5-1/4 350 SD-110-500VP 430 SD-110-500VP
1836 5-1/4 450 SD-110-500VP 640 SD-110-750VP
1848 5-1/4 790 SD-110-1000VP 860 SD-110-1000VP
1860 5-1/2 950 SD-110-1000VP 1000 SD-110-1000VP
2024 5-1/4 380 SD-110-500VP 480 SD-110-500VP
2036 5-1/4 500 SD-110-500VP 720 SD-110-750VP
2048 5-1/4 670 SD-110-750VP 940 SD-110-1000VP
2060 5-1/2 840 SD-110-1000VP 1200 SD-110-1500VP
2436 5-1/2 600 SD-110-750VP 860 SD-110-1000VP
2448 5-1/2 800 SD-110-1000VP 1150 SD-110-1500VP
2460 5-1/2 1000 SD-110-1000VP 1385 SD-110-1500VP
3036 5-1/2 750 SD-110-750VP 1100 SD-110-1500VP
3048 5-1/2 1000 SD-110-1000VP 1440 SD-110-1500VP
3060 5-1/2 1260 SD-110-1500VP 1800 SD-110-2000VP
3636 5-1/2 900 SD-110-1000VP 1300 SD-110-1500VP
3648 5-1/2 1200 SD-110-1500VP 1730 SD-110-2000VP
3660 5-1/2 1500 SD-110-1500VP 2000 SD-110-2000VP