Filter Bag Magnets

filter bag magnets
  • Removes ferrous particles from liquid flow increasing filter bag life
  • All 304 stainless steel sturdy construction resists wear and damage
  • EPDM (Ethylene Propylene Diene M) rubber bumpers to protect fabric bags
  • Easy cleaning. Remove magnet tube from stripper sleeve. Magnetic particles drop off into waste pan. Less than 5 seconds to clean.
  • Magnet assemblies never lose power. Frequent magnet cleaning results in lower disposal rate of the filter bags.
  • Filter bag magnets have been reported to reduce bag usage by up to 15:1
  • Typical savings of 6:1 to 12:1 are common

Ordering Information

Request a Quote

Model Bag Size Bag Dia. x Lgth. Magnet Length
8282-08-15 1 7" x 16-1/2" 15"
8282-08-30 2 7" x 32" 30"
8282-08-8 3 4" x 8" 8"
8282-08-14 4 4" x 14" 14"
8282-08-20 8 5.6" x 21" 20"
8282-08-29 9 5.6" x 32" 29"
8282-08-34 12 8.2" x 32" 34"

Standard Filter Bag Magnets utilize Ceramic Magnets.
Add "N" suffix to part number for Neodymium Magnets
Add "A" suffix to part number for Alnico Magnets

Ceramic Neodymium Alnico
Gauss on Magnet Tube Surface 1200 Gauss 5500 Gauss 1350 Gauss
Capacity (steel chips) per 4" of magnet length 1 lb 2.45 lbs 1.55 lbs
Pull Force (for comparison purposes) 25 lbs 125 lbs 35 lbs
Effective Distance (for comparison purposes) 1-1/4" 1-1/4" 3"
Service Temperature (EPDM service temp = 300°F) 300°F 176°F 300°F

Deep Field Neodymium Versions available on request - contact engineering